Mobile Signal Checker: How to Check the Signal in Your Area Before You Buy a Booster
The quickest way to check the mobile signal in your area is to enter your postcode into your network’s online coverage checker, then confirm it with a real test on your phone inside and outside your home. Coverage maps are predictions, so a short test at your own address tells you far more about whether a signal booster will help.
Here is how to use the checkers, what they cannot tell you, and how to run a simple test that takes about ten minutes.
Where can you check mobile coverage by postcode?
Every major UK network has a free coverage checker on its website. EE, Vodafone, O2 and Three each let you enter a postcode and see predicted 4G and 5G coverage, usually split into outdoor and indoor. Many smaller providers, such as giffgaff, Tesco Mobile, iD Mobile, Lebara, Voxi and Smarty, use one of those four networks, so checking the parent network gives you the same picture.
Most checkers also have a live status page that shows known faults and planned work. If your signal has dropped suddenly, check that first. A mast outage or upgrade can affect a whole area for a few days and is not something a booster can fix.
Why does the map say good signal when your phone says otherwise?
Coverage maps are computer models. They estimate signal based on mast positions, power and terrain, then make general assumptions about buildings. They cannot know that your house has foil-backed insulation, a metal roof, thick stone walls or energy-efficient glass. They also cannot see a new building that now stands between you and the mast.
That is why so many people see good indoor coverage on the map and still have one bar in the kitchen. The map is often right about the signal outside your home and too hopeful about the signal inside it. This gap between outside and inside is exactly the problem a booster is designed to close.
How do you test the signal at your address?
A simple test gives you real figures to compare with the map.
- Turn off Wi-Fi so your phone uses the mobile network only.
- Open your phone’s field test mode, or the signal screen in settings, to see the signal level in dBm. Our guide to field test mode shows how on iPhone and Android.
- Note the reading in the room where signal is worst, then by a window, then outside at the front and back, and upstairs if you have one.
- Make a short call and load a web page at each spot.
As a rough guide, readings around -70 to -90 dBm are good, -90 to -105 dBm is usable but patchy, and below -110 dBm calls often fail. If the outside readings are noticeably better than the inside ones, a booster is very likely to help.
What does the result mean for a booster?
If you have usable signal outside but poor signal inside, a booster can bring the outside signal in. The outdoor aerial goes where your test showed the best reading, and the indoor aerial goes where you need coverage most.
If there is no usable signal anywhere outside, not even upstairs or at the end of the garden, a booster has nothing to amplify. In that case Wi-Fi calling over your broadband, or a different network with better local coverage, is the better route.
If the test shows one network is clearly stronger outside than the one you use, you have two choices: switch to the stronger network, or keep your network and choose a kit that covers its bands. A universal booster covers all four main networks, which also suits households where people use different providers.
Which network is best in your area?
No single network is best everywhere. One may be strongest in your village and weakest in the next. Ask neighbours which network works for them indoors, and compare all four checkers for your postcode. If you work from home and calls matter, try a cheap pay-as-you-go SIM on another network for a week before you switch contract.
If you want to keep your current number and network, our network pages for EE, Vodafone, O2 and Three explain which kits match each one.
How often should you re-check your signal?
Coverage changes over time as networks upgrade masts, switch bands and add 5G. If you checked your area a year or more ago, run the test again before you switch network or buy equipment. Recheck after any big change nearby, such as new buildings or tree growth between you and the mast.
What should you do next?
Write down your outdoor and indoor readings, your network and the floor area you want to cover. Then use our guide to choosing a booster, or send the details through our floor plan analysis page and we will suggest a kit. Delivery is free in 5 to 7 working days, and you can return a kit within 30 days.
Frequently asked questions
Is there one mobile signal checker for all networks?
Each network has its own checker. Smaller providers use one of the four main networks, so check that network’s map.
Are coverage maps accurate indoors?
They are estimates. They often overstate indoor signal because they cannot see your walls, roof or insulation.
What is a good mobile signal in dBm?
Around -70 to -90 dBm is good. Below about -110 dBm calls often fail.
Will a booster help if the checker shows no coverage?
Only if there is some real signal outside when you test. With none at all, choose Wi-Fi calling instead.
Have your readings? Send us your postcode, network and floor area, and we will match a kit to the signal you have. Get a free floor plan analysis